SolFirsTech ALUMINUM GROUND MOUNT - SCREW PILE FOUNDATION

SolFirsTech ALUMINUM GROUND MOUNT - CONCRETE FOUNDATION

Solar Ground Mounting System is applied to large commercial solar plant for public utilities. This is a single column mounted system which is suitable for both frame and frameless modules.

SolFirsTech METAL ROOF MOUNT - TRAPEZOID ROOF CLAMPS

SolFirsTech-RC Roof Clamp Series Dimensions (mm) A B C(°) SolFirsTech-RC-08 28 34 122 SolFirsTech-RC-09 20 20 123 SolFirsTech-RC-10 20 20 123 SolFirsTech-RC-11 25 23.8 132 SolFirsTech-RC-18 22 16 120 SolFirsTech-RC-21 52 12 135 SolFirsTech-RC-22 33.7 18 135 SolFirsTech-RC-23 33.7 18 135 Technical Details Installation  Metal Roof Wind Load  up to 60m/s Snow Load  1.4kn/m² Tilt Angle  Parallel to Roof Surface Standards  GB50009-2012, EN1990:2002, ASE7-05, AS/NZS1170, JIS C8955:2017, GB50429-2007 Material  Anodized Aluminum AL 6005-T5, Stainless Steel SUS304 Warranty  10 Years Warranty

SolFirsTech BIPV ROOF MOUNT

Solar Panel Mounting Structure for Tin Roof with Solar Hook

Different Tile Roof require different Tile Hook, based on tile roof mould,you can choose suitable hook as per your roof type.

SolFirsTech ALUMINUM GROUND MOUNT - CONCRETE FOUNDATION

Solar Ground Mounting System is applied to large commercial solar plant for public utilities. This is a single column mounted system which is suitable for both frame and frameless modules.

SolFirsTech FLAT GROUND MOUNT - MULTI-ROW TYPE, I TYPE

Multi-Row Type Structure Multi-row module installation design may increase land utilization rate, improve power generation efficiency, and raise economic benefits. Recommended tilt angle: Less than 15° Recommended environment: High snow load and wind load. l-Type Structure The structure is fixed by two open posts. It is stable, and convenient in installation. Recommend ed environment: Low snow and wind load. Technical Details Installation  Ground Wind Load  up to 60m/s Snow Load  1.4kn/m² Standards  GB50009-2012, EN1990:2002, ASE7-05, AS/NZS1170, JIS C8955:2017, GB50429-2007 Material  Anodized Aluminum AL 6005-T5, Hot Dip Gavanized Steel, Stainless Steel SUS304 Warranty  10 Years Warranty

SolFirsTech BALCONY MOUNT

Wind-solar Hybrid Street Light

Characteristics ·Patented lens, bat-wing light distribution, light is well-distributed ·Intelligent control system to reduce the power consumption of the whole lamp ·Whole lamp is easy to assemble and easy to maintain ·High cycle times, economical and practical Application ·Road lighting                   ·Landscape lighting                   ·Schools ·Remote countryside        ·Agriculture and animal husbandry   Wind-solar Hybrid Street Light Specifications Solar panel power 120W±15% 150W±15% 240W±15% 300W±15% Horizontal axis wind turbine 200W 300W 400W 500W Wind and solar hybrid controller 1 SET Battery capacity 12V/150Ah 12V/100Ahx2 12V/150Ahx2 12V/200Ahx2 Battery Type Lead-acid batteries(Gel) Main light power 40W 50W 80W 100W Color temperature 4000K Height of the whole lamp 7.0m 8.0m 9.0m 10.0m Operating temperature -20°C~55°C Windproof strength 27m/s（Wind Grade 10) Rainy days 5〜7 days

Horizon D Series Single Point Drive Single Axis Solar Tracking Systems

Features & Characteristics High Adaptability  Gradient difference adaptability to uneven terrain in N-S direction up to 15% Less Piles  The 2P module design saves pile foundations (to 140 pcs/MW) and greatly reduce the cost Compatibility   Compatible to 182/210mm cell solar modules Accessibility  Obstacle-free among independent trackers, easy for construction and maintenance Reliability   The independent control system help to monitor the operation, find fault points in time, and reduce power output loss Smart Tracking   Adjust tilt angle smartly and timely according to terrain and weather data to increase power output Reasonable Design  The stability is ensured via exclusive structural design and strict wind tunnel test. Tracker Structure Tracking Technology Horizontal Single Axis Tracker System Voltage 1000V/1500V Tracking Range ±45°/±60° Working Wind Speed 18 m/s (Customizable) Max. Wind Speed 35 m/s (ASCE 7-10) Modules per Tracker ≤60 Modules(Customizable) Principal Materials Hot-Dip Galvanized Q235B/Q355B, Zn-AI-Mg Coated Steel Mean Coating Thickness ≥65 micron Drive System Slewing Drive Foundation type PHC / Cast-in-Place Pile / Steel Pile Control System Control System MCU Tracking Mode Closed Loop Time Control + GPS Tracking Accuracy <2° Communication Wireless (ZigBee, LoRa); Wired (RS485) Powder Acquisition External Supply / String Supply / Self-Powered Auto Stow at Night Yes Auto Stow During High Winds Yes Optimized Backtracking Yes Protection Degree IP65 Working Temperature -30°C-65°C Anemometer Yes Power Consumption 0.3kWh per day

Metal Roof Mounting System Solar Panel Mounting Brackets for Tin Roof

With variety of different Tin Roof Brackets, SolFirsTech Tin Roof Mounting System can meet trapezoid or corrugated metal roof and standing seam roof demand with or without penetrating on the roofs.

Easy Installation Solar Carport Mounting System Solar Aluminum W type Carport Mounting

Solar Carports offers a fexible,simple and affordable solution for Solar Mounting System.Solar carports utilize exisiting parking areas to generate renewable power and provide shaded or covered parking for autos,electric charges,on gird mw solar systems.

Pitched Roof PV Brackets Solar Panel Mounting Kit for Tile Roof

With innovative rail and module,our Tile Roof Mounting enables significantly faster and easier installation than others.